M Chemicals proposes an expansion of its synthetic organic chemicals manufacturing unit in dist. Surat, Gujarat

Chemicals

Status: Conceptual

Promoter: M Chemicals

Project: Proposes an expansion of its synthetic organic chemicals manufacturing unit

Location: GIDC Sachin, dist. Surat, Gujarat

Capacity: (Expansion from 10 TPM to 35TPM).

Project Details: The estimated cost of the expansion is Rs. 12 million. The current status of the project could not be ascertained. According to MoEF sources, EIA report has been prepared by Aqua-Air Environmental Engineers. The existing plant manufactures 10 TPM 6 Nitro, 1-Diazo, 2-Napthol, 4-Sulphonic Acid. The expansion entails addition of new products namely, 25 TPM G-Salt, R-Salt, Amido G-Acid, Aniline 2,4 DSA, Aniline 2,5 DSA, Para Nitro Chloro Benzoyl Sulphonic Acid, Sulfo Tobias Acid, Para Cresidine Ortho Sulphonic Acid, Schaffer’s Acid, Broenner’s Acid. Total plot area is approx. 1,650 sq. mtrs, out of which, 300 sq. mtrs has been used for green belt development. 5 KLD effluent will be treated in in-house ETP and 10 KLD effluent will be sent to common MEE of MEPL for evaporation.

Madhav Ply Industries has commissioned a resin manufacturing unit in Gujarat.

Polymers, Fibers and Resins

Status: Commissioned

Promoter: Madhav Ply Industries

Project: Commissioned a resin manufacturing unit

Location: at Village Raurapura, dist. Anand, Gujarat in the existing plywood plant premises.

Project Details: The manufactured resins would be used for captive purpose. The resin plant was commissioned in H1 2016. According to MoEF sources, the unit manufactures 20 TPM phenol formaldehyde resin, 20 TPM urea formaldehyde resin & 50 TPM melamine formaldehyde resin. The existing plant manufactures 25,000 TPM block board, 10,000 TPM flush door, 25,000TPM plywood.

Mamta Texdyes (Samba) proposes a synthetic organic chemicals manufacturing unit in dist. Valsad, Gujarat

Chemicals

Status: Conceptual

Promoter: Mamta Texdyes (Samba)

Project: Proposes a synthetic organic chemicals manufacturing unit

Location: GIDC Sarigam, dist. Valsad, Gujarat

Project Details: The project is spread over 2,250 sq. mtrs. The estimated cost of the project is Rs. 32 million. The current status of the project could not be ascertained. According to SEIAA sources, Eco Chem Sales Services is the environmental consultant. The proposed products are 200 TPM sulphur black grains, 300 TPM sulphur black liquid & the by-products are 250.1 TPM sodium thio sulphate crystal & 47.12 TPM sodium chloride salt. 700 sq. mtrs area has been proposed for green belt development. Industrial waste water will be treated in primary and tertiary treatment plant and treated waste water will be discharged into CETP Sarigam.

Resipol Adhesives proposes an expansion of synthetic organic chemicals manufacturing unit in Gujarat

Organic, inorganic & specialty chemicals

Status: Planning

Promoter: Resipol Adhesives

Project: proposes an expansion of its synthetic organic chemicals manufacturing unit

Location: Village Rajpur, dist. Mehsana, Gujarat

Project Details: The estimated cost of the expansion is Rs. 40 million. The current status of the project could not be ascertained. According to SEAC sources, the manufacturing of existing products, 2.0 TPM benzyl alcohol, 1.1 TPM benzyl benzoate, 3.0 benzoic acetate, 1.4 TPM sodium benzoate, 1.8 TPM sodium acetate will be discontinued and 300 TPM polyester resins (different grades) & alkyd resins (different grades), 90 TPM melamine formaldehyde resin & 85 TPM urea formaldehyde resin will be manufactured as new products. The plot area is approx. 6,033.00 sq. mtrs. Unit has proposed 2,000 sq. mtrs area for green belt development. Industrial effluent of 0.42 KLD after primary treatment will be evaporated in kettle type evaporator. Two DG sets each of 65 KVA will be provided. It was decided to recommend the project to SEIAA, Gujarat for grant of environmental clearance.

Royal Wood proposes a resin manufacturing unit in dist. Kutch, Gujarat

Polymers, Fibers and Resins

Status: Planning

Promoter: Royal Wood

Project: proposes a 90 TPM phenol formaldehyde resin, urea formaldehyde resin, melamine urea formaldehyde resin & melamine formaldehyde resin manufacturing unit

Location: Village Modvadar, dist. Kutch, Gujarat

Project Details: The current status of the project could not be ascertained. According to MoEF sources, existing products are 3 million sq. mtrs/ month plywood, flush door, block board & veneer. The manufactured resin will be used for in-house consumption at the wood products plant. The project will come up on 11,603.62 sq. mtrs of existing land. The greenbelt area is 600 sq. mtrs. A base platform will be constructed for the resin plant; remaining will be MS structure.

Shabnam Petrofils proposes an expansion of its Partially Oriented Yarn manufacturing unit in dist. Surat, Gujarat

Textiles

Status: Planning

Promoter: Shabnam Petrofils

Project: proposes an expansion of its Partially Oriented Yarn (POY) manufacturing unit

Location: Village Karmala, dist. Surat, Gujarat

Project Detail: The capacity to be augmented from 3,000 TPM to 4,500 TPM. The current status of the project could not be ascertained. According to MoEF sources, the expansion will come up on the existing land area of 32,679.00 sq. mtrs. Greenbelt area is 13,111.90 sq. mtrs. The company is manufacturing existing product POY from polyester chips. As part of the expansion, the company will manufacture POY from PTA. The estimated capital cost of the project is Rs. 500.7 million. Additional power requirement for the project will be 1,400 KW, which will be procured from DGVCL.

Aluplast India inaugurated its uPVC doors and window systems manufacturing unit in dist. Vadodara, Gujarat.

Building Materials

Status: Commissioned

Promoter: Aluplast India

Project: uPVC doors and window systems manufacturing unit

Location: at GIDC Savli, Village Manjusar, dist. Vadodara, Gujarat

Project Details: Aluplast India inaugurated its uPVC doors and window systems manufacturing unit. The estimated cost of the project is 4 million euros. According to media sources, the plant has been set up to meet the export demand from China, Australia, Indonesia and China, among other countries. 60 % of the products from the plant will be exported while the rest will be used to meet demand in India.

Aarti Industries has commissioned an expansion of its Nitro Chloro Benzene unit in Gujarat

Chemicals

Status: Commissioned

Promoter: Aarti Industries

Project: Commissioned an expansion of its Nitro Chloro Benzene manufacturing unit

Capacity: (Expansion from 57,000 TPA to 75,000 TPA )

Location: GIDC Estate, Taluk Jhagadia, dist. Bharuch, Gujarat.

Project Detail: The expansion stands commissioned since November 2015.

Panoli Intermediates proposes an expansion of its specialty chemicals manufacturing unit and a captive power project in Gujarat

Chemicals

Project Status: Planning

Promoter: Panoli Intermediates (India)

Project: Capacity expansion of its specialty chemicals manufacturing unit and a new 10 MW coal-based captive power project.

Location: Unit-III, GIDC Nandesari, dist. Vadodara, Gujarat

Project Details: The estimated cost of the project Rs. 100 million. The current status of the project could not be ascertained. According to MoEF sources, the total plot area is 15,480 sq. mtrs. The capacity of isomers & DNCB such as 2:4 DNCB, 2:6 DCNB, 2:5 DNCB is to be augmented from 200 TPM to 2200 TPM, ortho anisidine/ para anisidine from 100 TPM to 1100 TPM, ortho nitro aniline/ para nitro aniline from 300 TPM to 2,300 TPM, isomers of DCA from 80 TPM to 1,080 TPM, isomers & DCNB such as 2:3 DCNB, 2:5 DCNB. isomers of DCNB such as 2:3 DCNB, 2:5 DCNB, 3:4 DCNB from 200 TPM to 2,200 TPM, H-acid from 50 TPM to 500 TPM and addition of a new product namely, 1,500 TPM derivatives of nitro phenol and a new 10 MW coal-based CPP. 10 MW power requirement is to be met from MGVCL and 10 MW from the CPP. The effluent will be treated in proposed effluent treatment plant.

Nelson Laminate proposes a laminated sheets manufacturing project in dist. Rajkot, Gujarat.

Wood products

 

Status:  Unknown / Could not be ascertained

Promoter: Nelson Laminate

Project:  Plans  a 200,000 nos./ month laminated sheets manufacturing project

Location:  Village Nava Sadulaka, dist. Rajkot, Gujarat.

Environmental Consultant:  TR Associates.

Project Details:  According to MoEF sources, the company will also manufacture 1100 TPM phenol formaldehyde resin, 500 TPM melamine formaldehyde resin and 1200 TPM urea formaldehyde resin. The total estimated cost of the project is Rs. 10 million. The resins will be used for production of laminated sheets within the premises and for sale outside. The total land area is 17,604 sq. mtrs out of which 5,911 sq. mtrs will be used for greenbelt area development. 18.5 KLD STP will be set up.