Surguja Power proposes a thermal power project in dist. Surguja, Chhattisgarh.

February 16, 2016

Thermal Power generation

Status: Conceptual Stage

Promoter: Surguja Power, a 100% subsidiary of Adani Mining

Project: Proposes a 540/600 MW coal washery rejects based thermal power project spread over 47.5 hectares.

Location: at Villages Parsa, Kete, dist. Surguja, Chhattisgarh.

Project Details: The estimated cost of the project is Rs. 35 billion. According to MoEF sources, Greencindia consulting is the environmental consultant. The project will comprise of a 4×135/ 150 MW power plant based on the coal washery rejects within the Parsa East and Kete Basan coal block at Udaypur Tehsil, dist. Surguja. The Group has been assigned work by Rajasthan Rajya Vidyut Utpadan Nigam (RRVUNL) for Mining, Development and Operation of Parsa East Coal Block and supply of beneficiated coal. Sizable reject coal will be generated, which shall be utilized for power generation by setting up the power project within the coal block. The plant is proposed to have Circulating Fluidized Bed Combustion (CFBC) based coal fired boilers.

Advertisements

Airports Authority Of India proposes extension of runway, expansion of apron in dist. Raipur, Chhattisgarh.

May 21, 2015

Airports

Status: Planning Stage

Promoter: Airports Authority Of India

Project: Proposes extension of runway, expansion of apron at Swami Vivekananda Airport

Location: Dist. Raipur, Chhattisgarh

Cost: The estimated cost of the project is Rs. 1,035 million.

The current status of the project could not be ascertained. According to MoEF sources, the project will envisage extension of runway, expansion of apron suitable for D type aircraft and other associated works. ABC Techno Labs India is the environmental consultant. The Airport is having runway 06/24 of dimension 2286 m x 45 m, with PCN 50/F/B./W/T suitable for A-320 type of aircraft. There is a demand from Airlines to extend the Runway by at least 900 ft and if possible to 11000 ft to facilitate international operations.

The proposed extension will include:

i) Extension of runway by 965 mtrs x 45 mtrs towards runway 24 beginning to make the operational runway dimension 3251 mtrs x 45 mtrs. The PCN value of entire runway is to be made suitable for A310-200 (Code ‘D’) type of aircraft.
ii) Provision of 7.5 mtrs wide shoulders on either side of extended runway.
iii) Provision of overrun (60 mtrs x 45 mtrs) and turning pad for extended runway.
iv) Provision of RESA of 240 mtrs x 90 mtrs dimension at 24 beginning of runway.
v) Resurfacing of existing runway and shoulders 06 /24.
vi) Expansion of apron on East side by 88 mtrs x 103 mtrs to park two additional one A310-200 (Code ‘D’) / B737-900 and one A321 (Code ‘C’) type of aircrafts.
vii) Dismantling of existing shoulders on East side of apron, and overrun at 24 beginning of runway.
viii) Widening of shoulders of existing apron and taxi tracks from 3.5 m width to 7.5 m. Shoulder on East side to be of full strength and others of normal strength.
ix) Construction of new isolation bay of size 91 mtrs x 77 mtrs suitable for A310-200 type of aircraft including 7.5 mtrs wide shoulders.
x) Development of basic strip for runway extension and leveling/grading work for apron expansion and isolation bay. xi) Provision of 10550 mtrs x 5 mtrs perimeter road all around the periphery of boundary wall in the proposed extension of runway, vehicular lane for apron 180 mtrs x 5 mtrs, 1.25 mtrs wide berms on either side of perimeter road.
xii) 08 nos. watch towers for new acquired land.
xiii) Provision of drainage and rain water harvesting system on either side of runway beyond 150 mtrs from the centre line of runway.
xiv) Provision of RCC box culvert (60 mtrs length) of opening size 1 mtr x 1 mtr below runway for aircraft load and half strength RCC box culvert of same size beyond runway upto basic strip 150 mtrs on either side of runway to facilitate cable crossing.
xv) Provision of GSE & appropriate hard stand area of 2900 sq. mtrs.
xvi) Construction of new localizer and glide path buildings and connecting roads 200 mtrs x 5 mtrs. and other associated works. The total area of the existing airport is 287.648 hectares and additional land is 128.662 hectares which has been acquired by NRDA (Naya Raipur Development Authority) and handed over to AAI. [Info as of: May ’15]


Ultratech Cement is planning an expansion of its integrated cement project in Chhattisgarh.

January 31, 2015

Cement

Status: Planning Stage

Promoter: Ultratech Cement

Project: Plans an expansion of its integrated cement unit

Location: Village Hirmi, dist. Baloda Bazar, Chhattisgarh

Project Details: The expansion will involve capacity augmentation of the clinker plant from 2.2 MTPA to 6.75 MTPA, cement from 6000 TPD to 8000 TPD and the coal-based CPP from 50 MW to 100 MW and a new 15 MW WHR-based CPP. The project will come up in the existing land. The total estimated project area is 167.1 hectares and the estimated cost of the project is Rs. 20,000 million.

Current Status: The project is waiting for environmental clearance. Further details of the project are yet to be finalized.


Raipur Power & Steel has been put on hold a pelletisation project in Chhattisgarh.

September 13, 2011

Metallurgical Industries

Status: Delayed/Put-on-Hold
Promoter: Raipur Power & Steel
Project: pelletisation unit
Location: Borai Industrial Growth Center, dist. Durg, Chhattisgarh
Current Status : As of August 2011, the project is on hold. . Civil work is expected to commence in February 2012.


Kailash Castings has abandoned a sponge iron production project in Chhattisgarh

September 2, 2011

METALLURGICAL INDUSTRIES

Status : Abandoned
Promoter : Kailash Castings Limited
Project Name: Sponge iron production project
Product : Sponge iron (60,000-TPA )
Location: Tilda,dist. Raipur, Chhattisgarh

Current Status : As of July 2011, the project has been abandoned.


JK Lakshmi Cement is implementing a cement manfacturing project Chhattisgarh

September 2, 2011

CEMENT

Status : Under Implementation
Promoter: J K Lakshmi Cement Limited
Project Name: Cement manufacturing project
Product: Cement – (1.50-MTPA )
Cost: Rs. 12000 million
Location : Ahiwara, Dist. Durg, Chhattisgarh

Current Status : As of July 2011, civil work is under progress and the project is scheduled for completion in 2013.


Pushp Steels & Mining is planning an integrated steel project in Chhattisgarh

August 20, 2011

METALLURGICAL INDUSTRIES

Status: Planning Stage
Promoter: Pushp Steels & Mining Private Limited
Project: Integrated steel project
Location: Borai, Dist. Durg, Chhattisgarh
Product: Sponge iron (0.40-MTPA ), WHR & FBC based CPP (24-MW )
Cost:Rs.3800 million

Current Status: As of July 2011, the project was waiting for Government approval. Civil work is expected to commence in 2012.