M Chemicals proposes an expansion of its synthetic organic chemicals manufacturing unit in dist. Surat, Gujarat

August 5, 2016

Chemicals

Status: Conceptual

Promoter: M Chemicals

Project: Proposes an expansion of its synthetic organic chemicals manufacturing unit

Location: GIDC Sachin, dist. Surat, Gujarat

Capacity: (Expansion from 10 TPM to 35TPM).

Project Details: The estimated cost of the expansion is Rs. 12 million. The current status of the project could not be ascertained. According to MoEF sources, EIA report has been prepared by Aqua-Air Environmental Engineers. The existing plant manufactures 10 TPM 6 Nitro, 1-Diazo, 2-Napthol, 4-Sulphonic Acid. The expansion entails addition of new products namely, 25 TPM G-Salt, R-Salt, Amido G-Acid, Aniline 2,4 DSA, Aniline 2,5 DSA, Para Nitro Chloro Benzoyl Sulphonic Acid, Sulfo Tobias Acid, Para Cresidine Ortho Sulphonic Acid, Schaffer’s Acid, Broenner’s Acid. Total plot area is approx. 1,650 sq. mtrs, out of which, 300 sq. mtrs has been used for green belt development. 5 KLD effluent will be treated in in-house ETP and 10 KLD effluent will be sent to common MEE of MEPL for evaporation.

Advertisements

Mamta Texdyes (Samba) proposes a synthetic organic chemicals manufacturing unit in dist. Valsad, Gujarat

August 5, 2016

Chemicals

Status: Conceptual

Promoter: Mamta Texdyes (Samba)

Project: Proposes a synthetic organic chemicals manufacturing unit

Location: GIDC Sarigam, dist. Valsad, Gujarat

Project Details: The project is spread over 2,250 sq. mtrs. The estimated cost of the project is Rs. 32 million. The current status of the project could not be ascertained. According to SEIAA sources, Eco Chem Sales Services is the environmental consultant. The proposed products are 200 TPM sulphur black grains, 300 TPM sulphur black liquid & the by-products are 250.1 TPM sodium thio sulphate crystal & 47.12 TPM sodium chloride salt. 700 sq. mtrs area has been proposed for green belt development. Industrial waste water will be treated in primary and tertiary treatment plant and treated waste water will be discharged into CETP Sarigam.


Resipol Adhesives proposes an expansion of synthetic organic chemicals manufacturing unit in Gujarat

July 7, 2016

Organic, inorganic & specialty chemicals

Status: Planning

Promoter: Resipol Adhesives

Project: proposes an expansion of its synthetic organic chemicals manufacturing unit

Location: Village Rajpur, dist. Mehsana, Gujarat

Project Details: The estimated cost of the expansion is Rs. 40 million. The current status of the project could not be ascertained. According to SEAC sources, the manufacturing of existing products, 2.0 TPM benzyl alcohol, 1.1 TPM benzyl benzoate, 3.0 benzoic acetate, 1.4 TPM sodium benzoate, 1.8 TPM sodium acetate will be discontinued and 300 TPM polyester resins (different grades) & alkyd resins (different grades), 90 TPM melamine formaldehyde resin & 85 TPM urea formaldehyde resin will be manufactured as new products. The plot area is approx. 6,033.00 sq. mtrs. Unit has proposed 2,000 sq. mtrs area for green belt development. Industrial effluent of 0.42 KLD after primary treatment will be evaporated in kettle type evaporator. Two DG sets each of 65 KVA will be provided. It was decided to recommend the project to SEIAA, Gujarat for grant of environmental clearance.


Eternis Fine Chemicals proposes an expansion of synthetic organic chemicals manufacturing unit in Maharashtra.

May 3, 2016

Chemicals

Status: Planning

Promoter: Eternis Fine Chemicals

Project: Proposes an expansion of its synthetic organic chemicals manufacturing unit

Location: MIDC Kurkumbh, dist. Pune, Maharashtra

Capacity: ( Expansion from 42,200 TPA to 60,000 TPA).

Project Details: The current status of the project could not be ascertained. According to MoEF sources, total land area is 100,400 sq. mtrs and built up area is 42,710 sq. mtrs. 33% will be developed as green belt area. The project will entail 1) Capacity expansion of existing products and by-products 2) Addition of similar products and by-products 3) Introduction of new eco-friendly biomass boiler as replacement to furnace oil. Project involves manufacturing of fragrance from organic raw materials by chemical process like hydrogenation, esterification, Diels-Alder reaction, cyclisation, dehydrogenation, aldol condensation etc. followed by distillation to match precise quality standards. By-products capacity will be augmented from 11,400 TPA to 20,000 TPA. The estimated cost of the project is Rs. 1,050 million. The power requirement 12,000 KVA will be available through Government Electricity Board.


Panoli Intermediates proposes an expansion of its specialty chemicals manufacturing unit and a captive power project in Gujarat

January 8, 2016

Chemicals

Project Status: Planning

Promoter: Panoli Intermediates (India)

Project: Capacity expansion of its specialty chemicals manufacturing unit and a new 10 MW coal-based captive power project.

Location: Unit-III, GIDC Nandesari, dist. Vadodara, Gujarat

Project Details: The estimated cost of the project Rs. 100 million. The current status of the project could not be ascertained. According to MoEF sources, the total plot area is 15,480 sq. mtrs. The capacity of isomers & DNCB such as 2:4 DNCB, 2:6 DCNB, 2:5 DNCB is to be augmented from 200 TPM to 2200 TPM, ortho anisidine/ para anisidine from 100 TPM to 1100 TPM, ortho nitro aniline/ para nitro aniline from 300 TPM to 2,300 TPM, isomers of DCA from 80 TPM to 1,080 TPM, isomers & DCNB such as 2:3 DCNB, 2:5 DCNB. isomers of DCNB such as 2:3 DCNB, 2:5 DCNB, 3:4 DCNB from 200 TPM to 2,200 TPM, H-acid from 50 TPM to 500 TPM and addition of a new product namely, 1,500 TPM derivatives of nitro phenol and a new 10 MW coal-based CPP. 10 MW power requirement is to be met from MGVCL and 10 MW from the CPP. The effluent will be treated in proposed effluent treatment plant.